1907 SHTLE LSA Enfield MkI*** Help!

[Salt Flat]

"Not the part you usually find in a tobacco can on some guy's gunshow table..."
BAR--- That's for sure --I looked for a long time at the gunshows.

Boltaction-- Thanks for the offering. I will keep you in mind for future needs.

KIWI--I want to thank KIWI for his help. This rifle is becoming more and more international. It was made in England, sent to Ireland, Then surplussed to the US and now the rear sight is coming from New Zealand! Salt Flat

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[RCS]

I had to make a backsight leaf slide a few years ago, I had all the parts to the backsight except the slide with the studs. I took two attempts but I did complete the slide. I made the studs out of hardwood than cut the checkering. Each stud has a rectangular bar that engages the track on the leaf from the opposite side plus a small coil spring. I will take it apart sometime to show the home-made parts. In my photo the studs look too sharp and I have since sanded them down to look better.Attachment 98645