NO4 Mk1 problem?

[Danktreebranch]

I think you guys might be right.After clambering a dummy i noticed there were scratches on the bullet and the case.Also the problem only occurs when there is a cartridge so that would make sense. Originaly thought the extractor became "sharp" and it was pushing the cartridge on the other side of the chamber. Thank you

---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------

Factory Ammo or reloads?

Reloads - Neck sized or F/L sized?

I have shot reloads,factory and surplus. The reloads are good.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Alan de Enfield]

I think you guys might be right.After clambering a dummy i noticed there were scratches on the bullet and the case.Also the problem only occurs when there is a cartridge so that would make sense. Originaly thought the extractor became "sharp" and it was pushing the cartridge on the other side of the chamber. Thank you

---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------



I have shot reloads,factory and surplus. The reloads are good.

"The reloads are good"

Does that mean you don't have the problem with them ?

[Danktreebranch]

"The reloads are good"

Does that mean you don't have the problem with them ?

Yes, I don't have a problem and they function the same as normal factory loads or surplus.I don't plan to shoot many hand loads through my Enfield. I like to handload for my Ross MkIII.

[Alan de Enfield]

Yes, I don't have a problem and they function the same as normal factory loads or surplus.I don't plan to shoot many hand loads through my Enfield. I like to handload for my Ross MkIII.

Sorry but I am now confused.
Can you just repeat what the problem actually is ?

I thought that it was 'extraction' but you say you don't have any problem with Reloads, Factory rounds or Surplus rounds.