Quote Originally Posted by usabaker View Post
I got my hands on a Winchester Pre-64 Model 70 barreled receiver in 30GOVT'06 for $50.00. She's missing the extractor, extractor pin, and spring (which I have on order) and the bolt assembly, I might have one lined up. At some point in its life, someone drilled and tapped some holes in her that I will need to fix. But that about it, her bore is great.

I wanted to ask y'all who are knowledgable, what I should be looking for price wise for a complete bolt. I'm just building a hunter/shooter, not going for a full matching and correct rifle. I'm new to the Winchester world so a bit skittish on the prices since I have no clue about the value of the parts.

Thanks in advance

Bill

Attachment 101691Attachment 101692Attachment 101693Attachment 101694Attachment 101695Attachment 101696
Complete bolt $200-$300 unless you ran across a deal. If you dont have it already bottom metal will put you back about the same. Modified stocks can be had for $100 or less if you dont mind poorly fitted recoil pads and refinishing. An untouched stock $250 up. Be sure any stock you get is cut for the cloverleaf tang.
What's the 1st digit of the s/n? Cant quite make it out in the photo.