Advice Needed: 30GOVT'06 Winchester Pre-64 Model 70

[82Trooper]

As I recall and I could be full of it, it’s US Government 30 caliber Adopted 1906. There were a number of 30 caliber cartridges for the military to identify them they were listed by year adopted.

so it does not denote any affiliation between the specific Model 70 marked that way with any government service....it simply identifies the proper .30 cartridge to use...?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[vintage hunter]

so it does not denote any affiliation between the specific Model 70 marked that way with any government service....it simply identifies the proper .30 cartridge to use...?

30GOVT'-06 is nothing more than Winchesters pre-war designation for the 30-06 Springfield cartridge and has no government/military connections. The Winchester Model 1895 lever action was chambered for 3 cartridges used by the military, the 30GOVT'-06(30-06), 30GOVT'-03(30-03 and 30 U.S./ 30 ARMY (30'40 Krag). Its a Winchester thing...

[RCS]

That early bolt with the early safety is going to be difficult to find. Looks like 1940 dated barrel ? The US was buying M70 rifles in 30 Govt at the start of WW2

[usabaker]

That early bolt with the early safety is going to be difficult to find. Looks like 1940 dated barrel? The US was buying M70 rifles in 30 Govt at the start of WW2

Yup 1940, I found one that will fit but the safety was cut down for a scope. I'm in no rush which is a plus and I'm not restoring the rifle it will be a hunter/shooter so that gives me a little flexibility.

[RCS]

Here is a photo on my M70 target from around 1947 which I believe is the second variation bolt safety. Caliber 30 GovtAttachment 101705Attachment 101706

[usabaker]

Here is a photo on my M70 target from around 1947 which I believe is the second variation bolt safety. Caliber 30 Govt

Wow beautiful! The one I found so far has a spatulate thumb piece type safety, like in this picture but was cut down, I was guessing for a modern scope or maybe just so you could see past it. Who knows why people do such things.

Attachment 101707

[vintage hunter]

Here is a photo on my M70 target from around 1947 which I believe is the second variation bolt safety. Caliber 30 GovtAttachment 101705Attachment 101706

You have a type II-2 safety. There is a type II- 1 safety also that looks like a cut down type I with grasping grooves milled in the end.