AN/PVS-2 reticle diagram

[old tanker]

I believe from what I remember the reticle, dot or line was a 3 inch move at 150 meters. It's has been awhile since I used one.

Close, one click of the elevation or windage adjustment knobs moves the strike 3 inches at 150 meters

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[fjruple]

Close, one click of the elevation or windage adjustment knobs moves the strike 3 inches at 150 meters

Yes, you are right but the marks on the reticle also equates to 3 inches at 150 meters.

[Elphiel]

Can owners of the PVS-2 confirm the reticle is the same like in the PVS-1 manual, or ist it like the IWS reticle my friends PVS-2 has.

I'm just a bit curios if his PVS-2 has the wrong reticle on it. Perhaps its a custom one intended for the brits before the introduction of IWS? Or some home made reticle. I dont own it myself so cant ask him so unscrew the frontlens to take a look on the front of his tube. As far as i know the reticle is etched solid into the PVS-2 tube instead of a seperate glass reticle like in IWS right? Or is it a little plastic sheet with a printed reticle glued infront of the tube like on the L5 pocket scope?

thanks for the Info