1950 Long Branch No4 MkI* Lower Band Help

[adh2]

Mint means original finish...The rifle has never been through FTR.

---------- Post added at 07:51 AM ---------- Previous post was at 07:49 AM ----------

By lower band are you talking about the middle band on the hand guards?

If so shouldn't Numrich carry them?

Yes, the middle band where one attaches the sling. The Numrich ones are not marked like this original LB lower band.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[MasterChief]

Fill the stripped thread with silver solder and tap new threads. Could probably do it with propane, MAPP gas for sure. Best wishes.

[bros]

Mint means original finish...The rifle has never been through FTR.

---------- Post added at 07:51 AM ---------- Previous post was at 07:49 AM ----------



Yes, the middle band where one attaches the sling. The Numrich ones are not marked like this original LB lower band.

I can maybe help you out but you have to be more specific.........if you want the proper band as it would have left the factory with then it should have a LB stamp.....if you want that exact stamp as in your photo that is not a Long Branch manufactured part and therefore not correct to your "mint" rifle but that's up to you.
Let me know which one you want to install and like I said I may be able to help you!