Did I Luck In To A Long Rifle

[mmppres]

Nice rifle. Use some balitsol with some stainless steel wool. on the metal it will remove all the rust but not the finish. Just make sure its stainless steel. Put some kroil on the trigger screw top side. You can also pin point heat it. That means heating a rod that is smaller that screw diameter cherry red. Hold it too screw to transfer heat then tap an try to turn. may take a while to get it done. Use the right fitting screw bit. even making one fit right.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Jet Fixer]

Nice rifle. Use some balitsol with some stainless steel wool. on the metal it will remove all the rust but not the finish. Just make sure its stainless steel. Put some kroil on the trigger screw top side. You can also pin point heat it. That means heating a rod that is smaller that screw diameter cherry red. Hold it too screw to transfer heat then tap an try to turn. may take a while to get it done. Use the right fitting screw bit. even making one fit right.

Thanks. I'll give it a try.