L81 trigger guard

[nevadany]

That is not the correct TG for the L81

DW

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Lee Enfield]

That is not the correct TG for the L81

DW

Fwiw, it is the same TG, it has just had the front tang shortened to fit under the round bushing.

[nevadany]

Fwiw, it is the same TG, it has just had the front tang shortened to fit under the round bushing.

But it's not the same. The trigger bow might be the same shape, that's about it. Aside from the front needing to be cut of and milled/filed to fit under the round bushing, the rear screw hole also needs to be drilled and countersunk for the rear action screw.

DW

[nevadany]

Welp, I finally found the correct L81 trigger guard...

DW

[Lee Enfield]

Welp, I finally found the correct L81 trigger guard...

DW

got a photo of your rifle with the TG installed?

[nevadany]

I didn't take a picture of it installed yet, but I have a picture of the one I made vs. the correct one I recently got.

Hopefully, it attaches....top, is my cut down and filed to fit guard...bottom is the Parker Hale guard. I'll take a picture of it installed sometime soon

DW