-
Legacy Member
Early Production N04 Mk1
Did any other manufacturer besides Long Branch and Savage produce the MK1 Button cocking piece ? I have never seen one on a early Brit made rifle except for trials rifles.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
01-14-2021 09:31 AM
# ADS
Friends and Sponsors
-
Yes, Singer Manufacturing Company made them. They were one of the main subcontractors for smaller parts for the UK
No4 manufacturers & their parts can be found on BSA, Maltby & (IIRC) Faz No4's. But as with North American production, only the very early rifles are found with the button cocking pieces.
-
-
-
Contributing Member
Here's an early cocking piece marked "SM" for Singer Manufacturing. I have a 1943 No4T, and it too is wearing a button-headed piece. That one is marked "SM41".
Last edited by smle addict; 01-14-2021 at 01:04 PM.
-
-
Legacy Member
Thanks for the replies. While my 1L and two 5C Long Branch and savage rifles have LB and S marked button cockong pieces I had never seen one on a Brit rifle until I came into possession of a 1941 B mrked BSA rifle and it has no makers mark on the cocking piece that I can find.
-
Thank You to Charlie For This Useful Post:
-
Contributing Member
I have one of those "mystery manufacture" cocking pieces. I scrounged this back in 1992 from a No4 bolt I found in a gun show parts bin.
I suspect it is a LB/Savage/SM piece that was scrubbed and refinished for Indian/Pakistan service. The bolt was a renumbered Maltby piece that had heavy, block serial numbering, indicative of either POF
or Ishapore.
Comments/theories welcome
-
-
Contributing Member

Originally Posted by
smle addict
I have one of those "mystery manufacture" cocking pieces. I scrounged this back in 1992 from a No4 bolt I found in a gun show parts bin.
I suspect it is a LB/Savage/SM piece that was scrubbed and refinished for Indian/Pakistan service. The bolt was a renumbered Maltby piece that had heavy, block serial numbering, indicative of either
POF
or Ishapore.
Comments/theories welcome
I was just about to suggest Ishapore reworks and scrubbing.....
I looked at a typical Ishapore reworked No4 early last year belonging to a mate, virtually no original markings or subcontractors markings left after one, or perhaps two Ishy rebuilds.
-
-
Advisory Panel

Originally Posted by
smle addict
I suspect it is a LB/Savage/SM piece that was scrubbed
What are the letters half hidden by the suncorite seen in the second pic?
-
-
Contributing Member
I never did figure it out. Looks like three "E" s. Also has an X and another smaller E on the opposite side.
Last edited by smle addict; 01-15-2021 at 03:03 PM.
-