Here it is. The finish is much more satin than the camera shows it. The walnut was lighter than I would have like, but I think I was able to darken it just enough to bring out the American in it - or at least it matches the original forend handle. It will get heavily used come turkey time, so I went ahead and waxed it.

The buttplate turned out ok. It's curved on the underside from left-right. I didn't work it down that far when I fit it, so I may bed the underside center with epoxy to spread the recoil forces towards the center.
Next up I need to blue the barrel(s). The 20" norinco barrel has some light scratches that need buffed out. The original 30" barrel needs its bore cleaned up too. The repop bayonet adapters, of which I have 1 left, do not fit the norinco barrels - barrels are too thick. So I will likely need to abandon that and just leave it as a riot gun. There is plenty of thickness for screw in chokes, so maybe. Or perhaps I'll hold off till I get my lathe set up, knock off the 15thou or so off the muzzle end, and fit that bayonet adapter...and put in screw in chokes. I like having a sling when wandering in the woods for turkies.