M1D sheet I have been working on

[Rick B]

Here is a little blib from the tags I have from 163 M1D's that were imported back to the U.S. in 1992 . Rick B

Imported M1D's thru Federal Ordinance 1992


Serial #,, Bore,, Throat ,, HDSP ,, Stock ,, MCHL ,, Broken or missing ,, parts Replaced Parts


2664548 Excellent 3 NoGo OK Ok
2734471 Excellent 2+ NoGo OK Ok
2738393 Excellent 2 NoGo OK Ok No sling
2762850 Excellent 2+ NoGoOK Ok No cheek piece, Rebuilt Bolt Follower, firing pin, extractor / spring assy, ejector spring
2769858 Excellent 2- NoGo-- OK Ok No sling
2786706 Excellent 3 NoGo OK Ok Follower, firing pin, extractor / spring assy, ejector spring
2789941 Bad barrel NoGo OK Ok Buldged barrel
2801356 Excellent 2 NoGo-- OK Ok Adjusted Op rod
2819671 Excellent 3 NoGo OK Ok
2825104 Excellent 3 NoGo OK Ok Rebuilt bolt Follower, firing pin, extractor / spring assy, ejector spring

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[goo]

how much did m1d's cost in '92?
...
http://farm4.static.flickr.com/3020/...f80338.jpg?v=0
...
http://farm3.static.flickr.com/2361/...g?v=1199831431
...
http://farm3.static.flickr.com/2255/...d0f649.jpg?v=0
...
http://farm3.static.flickr.com/2300/...2cfe52.jpg?v=0

[duggaboy]

hey Goo" just love to look at the rifles you posted pic's on , thanks,

[asin]

Rick B
I have an M1-D that was imported to the US by Federal Ordnance. Would you be willing to send me a copy of the data tag or the data tag itself if you happen to have the one for my rifle? I'll send you the serial number via PM if you are willing to do so.
Thanks,
Steve

[Rick B]

Yes Asin, send me a PM with a Email to forward scans for you if it is in this batch. I have put the compete list together but still not sure what I am going to do as a whole. Rick B

[superdave269]

How and where are these import marked ? I'm just wondering if I have one of these.

[Rick B]

They were marked dead bottom of the barrel between the gas cylinder and barrel. You have to look to see it as it doesnt stick out. Rick B

[asin]

Rick,

PM sent with serial number and contact information. Thanks for taking the time to look.

Steve

[Rick B]

Rick,

PM sent with serial number and contact information. Thanks for taking the time to look.

Steve

Info sent back and yours was in the group. Hope it helps. Rick B

[Mike Haas]

Info sent back and yours was in the group. Hope it helps. Rick B

Rick B - That was an outstanding assist for info!!