Savage No 4 Mk1 T

[Buccaneer]

It would be nice to have a couple of views of the bolt guide way to see the ends of the front pad screws, but from what I can see it looks like it's probably a genuine T, although it has been 'enhanced' somewhat, at least IMHO.

Hi Roger additional pictures as requested, the "grease" around the front pad is in fact paint so it cant be wiped off.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Alan de Enfield]

Is that 'staking' of the screws 'normal' ?



I was under the impression that it is the surrounding metal that is punched so it deforms into the screw slot.

It is certainly that way on both my 4T & L42

[Surpmil]

Is that 'staking' of the screws 'normal' ?



I was under the impression that it is the surrounding metal that is punched so it deforms into the screw slot.

It is certainly that way on both my 4T & L42

IIRC Peter told us in the past that as some pads, having repeatedly come loose and been repeatedly re-staked, became impossible to stake from the pad into the screw slot, the screw head was instead staked into one of the divots formed in the edge of the pad previously.

[CINDERS]

IIRC Peter told us in the past that as some pads, having repeatedly come loose and been repeatedly re-staked, became impossible to stake from the pad into the screw slot, the screw head was instead staked into one of the divots formed in the edge of the pad previously.

My BSA 1944 T is listed on page 48 of Peter & Ian's book (A K & S 16684) being involved in dowelled bush & screw trials this is evident on the number of stakings on the front pad.
Scope & rifle are still together, I have no plans moving it on.