stripper clips

[phil441]

If you do unload them, do it gently. The little brass tabs at the bottoms are very fragile.
Ya have to remember that they were intended for one time use only.
Let us know what you end up with.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[c east]

I'll give 5 cents each for the brass if there are enough to fool with....Charlie

[ob'98]

If you do unload them, do it gently. The little brass tabs at the bottoms are very fragile.
Ya have to remember that they were intended for one time use only.
Let us know what you end up with.

I finally got these unloaded and up for sale on the CSP selling forum. I only broke one tab and replaced it with a good one. These are the ones that were loaded with brass and they are for the most part bright and clean with a couple that look like the one on top of the pile. There is a photo of them on the sell site. I have another batch of them in a bucket of solvent to clean up as they are rusty and dirty. Thanks for letting me post.