-
FREE MEMBER
NO Posting or PM's Allowed
9 mm maximum size?
I have some 125gr bullets that measure .356 on two different calipers. Can these be used in a 9mm auto pistol? They appear to be Hornady FP XTP, although they are not in the original container. --TIA
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
07-30-2014 03:54 PM
# ADS
Friends and Sponsors
-
Advisory Panel
.356 might be a bit tight for 9mm...9x19, right? That is they might not chamber quite right. They might be tight in the mouth and commencement. I wonder if they started life intended for 38 Super?
-
-
-
Legacy Member
The correct bullet dia. for the 9x19 is .355''-.356'' so as long as the C.O.L. is within spec they should work fine.
-
Thank You to vintage hunter For This Useful Post:
-
Advisory Panel
I might be tempted to try it too. I think I'd see if they chamber by hand and then mass load.
-
-
Legacy Member
Speer used to make a 125 gr SP with a diameter of .356 so your OK with it.
-