-
FREE MEMBER
NO Posting or PM's Allowed
3 New Pockets and a functional problem
-
02-02-2010 04:36 PM
# ADS
Friends and Sponsors
-
Legacy Member
Sounds like...
...over time the feed lips of the mag have spread out a little , causing the round to set too high up when the slide returns. Try another mag , and if it works , bend your old one back to the dimentions of the one that works.
Chris
-
Thank You to emmagee1917 For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
Problem solved
I ordered a spring kit from Wolff. It came with a recoil, firing pin, extractor and extra strength magazine spring. The old magazine spring was smaller then the new one in every dimention and filt kind of wimpy. The old recoil spring was a little shorter then the new one and was smaller in diameter at one end to grab the guide rod. I replaced them both along with the extractor spring for good measure. I took the pistol to the range, along with the old recoil spring. The first several shots out of the magazine functioned fine, but then the 4th had the high angle jam. I then put the old recoil spring in and it functioned perfectly for 4 magazines including one of Speer Gold Dots. So the combination of the stronger mag. spring and the weaker recoil spring worked. Thanks for all of your suggestions