HELP! I'm bedding a No1 MkIII with a heavy barrel, and I'm about to lose it!
The wood is off a range rifle that it fitted beautifully but it sits off to the right hand side of the barrel channel. So I pack the back of the wood to the collar, and try to shift it by shimming the draws but still. I've had this problem and sorted it out with numerous no4's but I'm stuffed if I can figure this one.
I don't want to touch glass with this one, seems there are heaps of instructions for no 4's but no1's I can't get information.
Any help would be greatly appreciated.
P.S. Wood seems straight
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.