-
FREE MEMBER
NO Posting or PM's Allowed
8mm Head stamp Help
Hello all, my first post on this excellent forum. I was able to get some milsurp 8mm today from a friend at a great price. The ammo is on stripper clips and a picture is attached. I am assuming it may be Turkish
and made in 1940 due to the star in a crescent in the head stamp. I will also assume it is corrosive. Any info from knowledgeable folks would be greatly appreciated. Thanks in advance
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-15-2011 05:56 PM
# ADS
Friends and Sponsors
-
Legacy Member
you didn't really need to post this. you know everything already 
it is Turkish
. it is 1940 made. it is corrosive. not much more to say really.
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
-
Advisory Panel
I wonder if it's AP core too?
-
-
Legacy Member
Whats the bullet weight, 154gr or 198gr? i have some of the 154gr Turk stuff w/1940 date and it's plain lead core with a cupro-nickel jacket. I once weighed 10 bullets and the charges, bullets weighed 153-155 gr. Can't remember the charge weight but it was'nt consistant either, well as I remember it varied by about a grain from one to the next but it's quite accurate nonetheless. Never had any of the 198gr.
Last edited by vintage hunter; 08-15-2011 at 09:12 PM.
-
-
FREE MEMBER
NO Posting or PM's Allowed
It would appear that these are 155 gr. based on the info from this web site (thank you Google).
Turk Mauser - 8mm Surplus Ammo Chronograph Results
They are not AP.
-
Legacy Member
I've read somewhere that you do NOT, if you are so fortunate to own a machine gun in 8mm, want to use this. Supposedly there is a special Turkish
round for MGs but the rifle rounds are not suitable for that. Anyone know if there is any truth to this?
-
-
Legacy Member
they are the Turk copy of the German
WWI GEW98 ammunition. Hot loaded, with a 154/155 bullet. Moves right around 2900fps. I like to pull the bullet and reduce the load to 45 grains and re-seat the bullet. Vey nice load.
-
Thank You to Calif-Steve For This Useful Post: