+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 42

Thread: Bren semi auto build - USA

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    10-07-2024
    Local Time
    12:13 PM

    Bren semi auto build - USA

    I recently purchased an MGS WWII Bren 1 Parts Kit as a project My dad and I could work on. I have most of the mechanical questions worked out, but before I begin any of the welding on the demilled receiver I would like advice on what kind of ATF form(s) may need to be filled out. Do I need to submit a request to manufacture a receiver and the $200 tax? Some forums I looked at implied that it wasn't required unless you plan on selling the final product. Can someone who has made a welded receiver advise me on how you handled it?

    Once I have this question answered I will document the project as it progresses.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Gart,
    I have two MGS Bren kits.... through a Weaponeer group buy, I got the semi auto conversion parts kit for one of them.

    Left to do is the blocking of the receiver and the welding like you mention.

    You do NOT need to file ATF paperwork to make your own rifle. A semi auto design is allowable....

    The $200 tax you are referring to, is based on a transfer of a NFA weapon I believe. As you probably know, post 1986 manufacture of a machine gun is prohibited by the general public. New manufacture machine guns are only as post 86 dealer samples transferable to other dealers / manufacturers and law enforcement.

    I would stick to a proven Semi Auto design, and insure that it is engraved somewhere that it is Semi Auto only and has a legible serial number. This is to keep you outta trouble if you are stopped and asked about it.

    I know that some folks keep the ATF letter of the proven Semi Auto design with their rifles, just in case they are questioned.

    The big pearl of wisdom to share, is to convert as much of the rifle as possible to the semi auto (bolts and FCG's)... and weld in a blocking bar, before welding up the original receiver. As you may know, the torch or cut pcs are just interesting items until you start fabing... then they could become "intent" to manufacture.

    As to selling the semi auto rifle..... it is permissable to sell your own manufactured rifle. However, it is a grey area due to the fact that you don't have a manufacturing license... I would intend to keep the rifle after you finish it, if I were you. Besides, that rifle would have questionable value, onless you are a recognized individual or corporation building such devices.

    If you are doing a novel Semi- Auto build, then you may want to submit that design for proving, to the ATF. This would be a prudent measure.

    These are just my opinions, and I am sure others will chime in. It is always best to follow up with your research, since I may be in error, and don't have a law license, and am not an expert in regulations governing all ATF and local/ state regs.

    I look forward to your build! Ask if you have further questions!!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Thread Starter
    Thanks!
    The ATF website has a form: ATF F 5320.1 (Form 1) — Application to make and Register a Firearm. That caused the confusion, apparently it is legal to make a firearm and not register it. I will be calling the ATF for a quick confirm, and then get it in writing.

    I will be using the semi parts kit from MGS and plan on duplicating their effort with the FA parts that came with the bren kit to make a complete second set of SA parts. (that may or may not turn out too well).

    I will be manufacturing my own welding jig as I cannot find one for less than $125. The measurements for how everything fits can be done using the internal components and magazine as guides. Remembering to allow for shrinkage. The Jig will be a stack of sheet metal tack welded together then machined to add copper plates behind the weld areas. Unless it costs more than $125 to do it that way.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Midmichigun's Avatar
    Join Date
    Sep 2010
    Last On
    01-10-2017 @ 10:06 PM
    Location
    Michigan
    Posts
    459
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Gart,
    Sounds like we have common effort/ purpose. I am planning on fabing up a second set of SA parts for my second build also... I believe the SA parts kit was sourced through Weaponeer, and is indeed the MGS.
    I agree on the jig also. I have kept my eyes peeled, but it always comes down to $$. I was hoping to come across a nice BREN print to create the jig, so I don't have to reason out critical dimenions.....
    To take into your account for shrinkage, remember to put in splices (virgin metal or donor torch cut). When I get a chance, I will link you to a website where the guy took the torched parts and milled them, and inset an exactly spaced pc. This controlled his contraction upon cooling. Some fella's go with 8620 steel, others 1045.

    I have access to MIG, stick and gas. TIG is the preferred method for rewelding....

    I know of several gunsmiths who have been cautioned by the ATF to report rifles that come in without serial numbers. As a matter of fact, one such rifle appeared during an ATF inspection at the gunsmiths. The ATF did follow up with the owner on where he got the rifle. Hence my cautioning of insuring that you have a legible SN on your manufacture.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Thread Starter
    You are probably referring to: Bren
    Also found limited blueprints on Bren blueprints...

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    camerl2009's Avatar
    Join Date
    Jul 2010
    Last On
    04-08-2013 @ 03:16 PM
    Location
    southern ontario
    Posts
    22
    Local Date
    10-07-2024
    Local Time
    01:13 PM
    this is one im going to follow post lots of pic's eh

  9. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-05-2024 @ 05:19 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,568
    Real Name
    Peter Laidler
    Local Date
    10-07-2024
    Local Time
    06:13 PM
    Hey Garthok I've just had a look at your BREN suggestion (post 5). It's amazing........ I wouldn't have believed it to be as possible and as good if I hadn't seen it myself. It's not just the good machine shop and welding facilities but the multi-skills of the fellow too. Great pictorial essay. Do you know him or did you just pick it up?

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Thread Starter
    Quote Originally Posted by Peter Laidler View Post
    Hey Garthok I've just had a look at your BREN suggestion (post 5). It's amazing........ I wouldn't have believed it to be as possible and as good if I hadn't seen it myself. It's not just the good machine shop and welding facilities but the multi-skills of the fellow too. Great pictorial essay. Do you know him or did you just pick it up?
    I just found that site while googling bren kits, it was that site that has inspired me to try this project. He does make it look easier than it probably is.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    camerl2009's Avatar
    Join Date
    Jul 2010
    Last On
    04-08-2013 @ 03:16 PM
    Location
    southern ontario
    Posts
    22
    Local Date
    10-07-2024
    Local Time
    01:13 PM
    you are teasing us canucks with this one though we have to get a new receiver machined and that in it self would cost quite a bit not to mention if your design is not approved your receiver gets choped not a big deal with something like a sten but a real big deal with a bren

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    garthok's Avatar
    Join Date
    May 2012
    Last On
    08-16-2013 @ 10:04 AM
    Location
    Nashville, TN
    Posts
    23
    Local Date
    10-07-2024
    Local Time
    12:13 PM
    Thread Starter
    I hate to say it, but I think I bought the last semi auto parts kit from MGS. They removed it from their online store just after I bought it. After several hours of grinding slag, everything "fits". I am torn between paying somebody to do the welding or learning to weld on my own. Both can be expensive. I have ordered the gas selector and a magazine, and MGS is sending me the missing barrel bolt. Anyway here it is roughly assembled:

    Attachment 33887
    Last edited by garthok; 05-18-2012 at 09:06 AM.

+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Similar Threads

  1. Semi Auto .303
    By RJW NZ in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 29
    Last Post: 12-01-2013, 07:40 PM
  2. semi-auto registed bren gun
    By britrecko in forum The Semi-Automatic Bren LMG (Light Machine Gun)
    Replies: 16
    Last Post: 01-17-2012, 01:01 PM
  3. Why did the USA go semi-auto when others did not?
    By Amsdorf in forum M1 Garand/M14/M1A Rifles
    Replies: 35
    Last Post: 11-24-2011, 06:49 PM
  4. Semi-auto M14?
    By Stevo in forum M1 Garand/M14/M1A Rifles
    Replies: 25
    Last Post: 06-19-2011, 03:11 PM
  5. Johnson semi-auto
    By bill1 in forum Milsurps General Discussion Forum
    Replies: 13
    Last Post: 04-24-2007, 05:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts