-
The front trigger guard screw is BSF I seem to remember and NOT 2BA as you suggest
-
-
09-04-2013 05:33 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
The bolt is about 6mm or 1/4inch so a 0BA or yes a BSF....
0BA = 25.38TPI, 6mm OD
1/4 BSF = 26 TPI, 6.35mm OD,
Bugger of a job determining the difference in TPI on about 1/2inch of thread, so a caliper on the OD on it should tell us easier.
I'll measure it when I get home.
======
edit - 6.32~6.34mm so BSF
======
For reference,
British Tools & Fasteners - BA Thread Profile
British Tools Fasteners - BSF Thread Profile
Last edited by ssj; 09-05-2013 at 04:32 AM.
-
-
Legacy Member
The front trigger guard screw is BSF I seem to remember and NOT 2BA as you suggest
Screw, guard trigger front 1/4" BSF (26tpi)
Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...
-
The Following 2 Members Say Thank You to Alan de Enfield For This Useful Post: