Forming Sten mag lips

[stenmkII]

I found this thread:

http://www.milsurps.com/showthread.php?t=36343

Which states what a Sten mag needs to feed right but I'm wondering if anyone has come up with a tool or solution for correcting sten feed lips to get the right angle? I have but about a half dozen that don't feed due to angle issues.

Years ago an outfit was selling surplus repair tools, the body would be fitted over one portion and another would be presumably hammered down on the feed lips but since then I've never seen them for sale nor am I aware of a repro repair kit.

Also I have Laider's book and yes it is awesome in every way!

I've got a DLO tube gun and a few other MGs but the Sten was my first and fave. I've got an integral silencer for it as well.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Gil Boyd]

stenmkII,
Welcome to the site, as far as I know the only one's now in existence are home made, but Peter will know I am sure if there are any helpful tips for you.

[Brit plumber]

Is this the tool you mean?

STEN Magazine Repair Tool Set - 01 - BRP CORP

[Lee Enfield]

I found this thread:

http://www.milsurps.com/showthread.php?t=36343

Which states what a Sten mag needs to feed right but I'm wondering if anyone has come up with a tool or solution for correcting sten feed lips to get the right angle? I have but about a half dozen that don't feed due to angle issues.

Years ago an outfit was selling surplus repair tools, the body would be fitted over one portion and another would be presumably hammered down on the feed lips but since then I've never seen them for sale nor am I aware of a repro repair kit.

Also I have Laider's book and yes it is awesome in every way!

I've got a DLO tube gun and a few other MGs but the Sten was my first and fave. I've got an integral silencer for it as well.

https://www.milsurps.com/showthread.php?t=58989
Marstar Canada - Sten Magazine Gauge (STN-102)
STEN Magazine Repair Tool Set - 01 - BRP CORP

[Vincent]

I've got a DLO tube gun and a few other MGs but the Sten was my first and fave. I've got an integral silencer for it as well.

Pictures man! Post some pictures! “Show them to me.. just like the girls gone wild on TV.”

[Peter Laidler]

As far as I remember, we didn't ever have a mag lips adjuster for the Sten. We used a simple gauge called an 'angle of presentation' gauge and you simply adjusted the feed lips to allow the round to be presented at 8 degrees as I recall. But additionally, when the round was correctly presented at 8 degrees, the feed lips were parallel. If you couldn't get BOTH, 8 degrees and parallel lips it indicated that the feed lips were worn. You couldn't really mention fancy tools in the same breath as Sten gun!

[stenmkII]

Thanks all. That kit BRP has is the one I was thinking of. It was $55 or so when I saw it, and at the time I only paid an average of $5 or so for the mags so I figured it wasn't worth it. Definitely not worth $250 to me.

Here's all my MGSs. The Scorpion is a SBR, the rest of them are autos.

The suppressor is a custom one of by Lee Minor from a long time ago. It has a ported barrel and a monocore aluminum baffle assembly. The tube is aluminum with a steel sleeve inside it where the porting is to protect it. The ports are near the chamber end. It's very quiet. The ports bleed off enough to keep 115gr subsonic for the most part. I've let it get dirty which let some bullets go supersonic at altitude as I'm in the mountains.

[browningautorifle]

I wish you'd do a short vid of you shooting that Mat 49, it would likely be the first most had seen as they're a bit scarce...

---------- Post added at 09:00 AM ---------- Previous post was at 08:59 AM ----------

As far as I remember, we didn't ever have a mag lips adjuster for the Sten.

I'm betting if they were out of whack you guys just smashed them flat.

[Vincent]

Thanks for the picture. That’s a nice collection. The camo Uzi looks great!

The Uzi always looked like it would awkward to me. Then I got to shoot some and found out looks really can be deceiving. It’s really a very nice handling SMG.

[browningautorifle]

I had one too, the folding stock version. Found out the same thing...was quite serviceable. There ARE other I like better though...