+ Reply to Thread
Results 1 to 9 of 9

Thread: No4 Mk1 Maltby Rear Sight Question

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Monkeytwo's Avatar
    Join Date
    Dec 2019
    Last On
    Yesterday @ 09:53 AM
    Location
    Ottawa
    Posts
    4
    Real Name
    JOSEPH
    Local Date
    11-05-2024
    Local Time
    05:55 AM

    No4 Mk1 Maltby Rear Sight Question

    I have acquired a No 4 Mk1 (Maltby) as a restoration project. The original rear sight (Mk3 stamped) was damaged and I purchased a milled rear sight (B stamped) as a replacement. I found out that the B stamped milled sight will not fit on the Maltby. pinning it to the rifle is no issue, but when the sight is flipped down, the top edges of the sight are slightly larger that the recess and the rear sight will not fold down all the way.
    I have seen pics of No4 Mk1 with milled sights, stamped sights, flip sights, but wondering why this milled sight will not work.
    Milled sight was purchased by Numrich (Rear Sight, Milled, Blue Steel (800m; Micrometer Click Adjustment For Elevation)

    I am looking to replace the milled with the stamped rear sight but any ideas why the milled would not work ?

    Thanks in advance

  2. Thank You to Monkeytwo For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member yoopercollector's Avatar
    Join Date
    Nov 2014
    Last On
    Yesterday @ 08:47 PM
    Location
    Sault Ste Marie,MI,USA
    Posts
    151
    Real Name
    chris louzon
    Local Date
    11-05-2024
    Local Time
    05:55 AM


    I think it's a No5 sight. Mo4 goes to 1300m.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 11:56 AM
    Location
    Victoria BC
    Posts
    30,415
    Real Name
    Jim
    Local Date
    11-05-2024
    Local Time
    02:55 AM


    Yep, 800 yds is a #5 sight. Still, it should fit. I wonder if you'd show us a pic of the problem?
    Regards, Jim

  7. Thank You to browningautorifle For This Useful Post:


  8. #4
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Yesterday @ 09:00 PM
    Location
    long island, ny
    Posts
    625
    Real Name
    Bill
    Local Date
    11-05-2024
    Local Time
    05:55 AM


    I'm curious to see it as well. My 1941 Maltby came with the 2 position flip sight which I quickly changed out for a nice condition Fazakerly No4 sight. It fit and works perfectly as should yours. Is it possible that your rifle was dropped onto the top of the receiver peening dents that are blocking the way? Or have you become a victim of Numrich's offshore reproductions sold as the genuine article scam.

    Don't get me wrong some of the stuff is really good like the replacement bolt I have in this No4 and some of it is truly awful like the stacking swivel I bought from them for my P14. Had to grind like crazy to get it to fit in the band and the E marking is 3xs the size it should be, it's also painted semi flat black. The screw they sent with it was original however go figure. No notation or description that it was a reproduction at that time.
    Attached Thumbnails Click image for larger version

Name:	20211118_192114.jpg‎
Views:	53
Size:	1.06 MB
ID:	137252  

  9. #5
    Legacy Member Monkeytwo's Avatar
    Join Date
    Dec 2019
    Last On
    Yesterday @ 09:53 AM
    Location
    Ottawa
    Posts
    4
    Real Name
    JOSEPH
    Local Date
    11-05-2024
    Local Time
    05:55 AM
    Thread Starter


    Thanks for the quick reply. makes sense. Appreciated.

    I will send the pics later this evening

  10. #6
    Legacy Member Monkeytwo's Avatar
    Join Date
    Dec 2019
    Last On
    Yesterday @ 09:53 AM
    Location
    Ottawa
    Posts
    4
    Real Name
    JOSEPH
    Local Date
    11-05-2024
    Local Time
    05:55 AM
    Thread Starter


    1 out of 1 members found this post helpful.

    Pics as Mentioned

    Pics of the sight as well as positioned on the rifle
    Attached Thumbnails Click image for larger version

Name:	20240924_171746.jpg‎
Views:	53
Size:	3.71 MB
ID:	137253   Click image for larger version

Name:	20240924_170626.jpg‎
Views:	45
Size:	3.45 MB
ID:	137254   Click image for larger version

Name:	20240924_171728.jpg‎
Views:	47
Size:	3.62 MB
ID:	137255   Click image for larger version

Name:	20240924_171454.jpg‎
Views:	41
Size:	3.69 MB
ID:	137256   Click image for larger version

Name:	20240924_171717.jpg‎
Views:	36
Size:	3.25 MB
ID:	137257  

  11. Thank You to Monkeytwo For This Useful Post:


  12. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 11:56 AM
    Location
    Victoria BC
    Posts
    30,415
    Real Name
    Jim
    Local Date
    11-05-2024
    Local Time
    02:55 AM


    1 out of 1 members found this post helpful.
    It's possible that part has no military origin. Numrich has several outsources that are producing military type products. Why don't you return that questionable piece and PM me your address, I'll send you a used but original machined sight like you want... At no cost... It has all the parts needed to mount it.
    Regards, Jim

  13. #8
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Yesterday @ 09:00 PM
    Location
    long island, ny
    Posts
    625
    Real Name
    Bill
    Local Date
    11-05-2024
    Local Time
    05:55 AM


    1 out of 1 members found this post helpful.
    As always Jim being a true gentleman.

    I totally agree not a real part. Most likely of Asian origin and not to original specifications. Get your money back.

  14. #9
    Contributing Member CoatiMundi's Avatar
    Join Date
    Mar 2020
    Last On
    Yesterday @ 11:51 PM
    Location
    Arizona, United States
    Posts
    150
    Local Date
    11-05-2024
    Local Time
    03:55 AM


    I got a Enfield sling swivel from Numrich recently. I was expecting an original but it is a repro as mentioned above with the giant “E” stamped on it. :/

  15. Thank You to CoatiMundi For This Useful Post:


+ Reply to Thread

Similar Threads

  1. LE No 9 rear sight question
    By Eddie Parks in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 07-22-2017, 05:10 AM
  2. a3 rear sight question
    By mac1911 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 08-20-2012, 10:25 PM
  3. Rear sight question
    By 44Largo in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 5
    Last Post: 07-19-2011, 12:50 PM
  4. S'G' Rear Sight Question?
    By rlc_hntr in forum M1/M2 Carbine
    Replies: 2
    Last Post: 02-13-2010, 12:16 AM
  5. No4 Mk1 Rear Sight Question
    By Adam5 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 07-17-2009, 01:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts