TR,
Your's is stamped on the same side and horizontal placement as the one here on the desk......... Mine is just past the knotch on the otherside, so about 3/4" farther toward the frt nose.
Just so you know.... the big box I have is on top of a storage shelf. To heavy for me to be tugging on right now. My Orthopedic reads this forum...... this should make him happy!!
But I have a gut feeling the other H.Q. I have is in one of the smaller 150 count boxes. One of those will be the next I tear in to.
I'm trying to document the different milling cuts near the knotch, the sight groove and letter stamps.
Like the early OI, then that same OI as on the Type I and II found on the early 4 rivet vs. the later 2 different size/style OI found on the late 4 rivet HG's. Or the smaller RSG vs. the larger RSG... Or the smaller W vs. the larger W.. etc. Bigger project than I was planning on doing, but since I have the chance, I feel the need to contribute. Hopefully the CC doesn't already have all of this recorded ;-(

Thx,
Charlie-painter777
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.