03' Fifth round feeding problem...JAM. Chuck in Denver maybe?

[Lancebear]

Hey J.B.,

I get it. The over tight stock warped or bent in the top edges of the stamped trigger guard. That is why the milled group worked after relieving the inletting and the stamped one didn't.

Thanks,

LB

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[edlmann]

The over tight stock warped or bent in the top edges of the stamped trigger guard. That is why the milled group worked after relieving the inletting and the stamped one didn't.

You can probably tweak that 03A3 TG back into shape with padded pliers.

If not, and if you can't find a milled guard, Bill Ricca has 03A3 TGs.

FWIW; AFAIK; IMHO; YMMV; yadda, yadda, yadda.

Regards, Ed Mann

Bobby Bowden is doing a fine job - just leave him alone.

Albert says, "Click here for free Gator wallpaper."

[Lancebear]

Thanks Ed,

Love to do that kinda stuff. Will give it a try, bet I can make it work. That would save me fifty or more bucks. Will give it a try soon.

LB









LB