Enfield in .223

[magellan]

.223 extractor?

A "tweaked" extractor for the No. 2 .22RF trainers should also work; already heat-treated and blackened.

Hope to get a "faux" No5 or similar style up and running this year.

The CZ mags also come in 7.62 x 39 (if you can find them).

I had a tinker with 10-round Ruger Mini-14 mags, but the spring is designed for autos. Chopping turns off the spring is not the way to go. You need to wind a spring to the same overall design and length, but with thinner music wires

Anyone thought of doing a 6mm PPC or 6.5 Grendel on a No4 action? Same head size as 7.62 x 39.

A bit off topic, but I made a 7.62x39 conversion too, Around a CZ527 mag again:

---------- Post added at 08:46 AM ---------- Previous post was at 08:36 AM ----------

And finally, not to derail this thread too far. I am now totally off-topic, but to finish with my conversions.
Here is my 7.62x25 prototype, this time around a TT33 magazine:

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

Here is my 7.62x25 prototype, this time around a TT33 magazine

What a neat plinker that would be around here.