+ Reply to Thread
Results 1 to 9 of 9

Thread: Reloading 303 British with 215 gr Woodleigh Bullets,

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Black Lab's Avatar
    Join Date
    Jan 2010
    Last On
    02-10-2014 @ 07:35 PM
    Location
    Fraser Valley BC.
    Posts
    37
    Local Date
    04-25-2025
    Local Time
    12:25 PM

    Reloading 303 British with 215 gr Woodleigh Bullets,

    Does anyone have any experience reloading or pet loads that they would be willing to share for 215 gr. Woodleigh bullets ? There is no mention of 215 gr. loads in the books I have. I have found some reloading info on 303 British - 215 grain loads but one of the first things I saw was a typo on the OAL of the cartridge. Not a good start if you ask me. I would like to get another reference so I have a place to start. Thanks, Jack
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Fozzybear's Avatar
    Join Date
    Dec 2011
    Last On
    10-21-2015 @ 04:51 PM
    Location
    Queensland, Australia.
    Posts
    40
    Local Date
    04-26-2025
    Local Time
    06:25 AM
    The Australianicon ADI/Thales website {this is the mob who make Varget, here it's called AR2208} list a 215gr projectile with 36gr-39.5 of AR2208{Varget}.

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Black Lab's Avatar
    Join Date
    Jan 2010
    Last On
    02-10-2014 @ 07:35 PM
    Location
    Fraser Valley BC.
    Posts
    37
    Local Date
    04-25-2025
    Local Time
    12:25 PM
    Thread Starter
    Thanks for the tip, I think I'll give IMR4350 a try starting with 303 British - 215 grain loads load data. I have a can of IMR4350 on the shelf that I have had good results with in the past. Not much data on reloading 303 British with the 215 gr.

  5. #4
    Legacy Member oldpaul's Avatar
    Join Date
    Mar 2009
    Last On
    02-02-2025 @ 01:17 AM
    Location
    Top left corner, between Vancouver and Vancouver
    Posts
    215
    Local Date
    04-25-2025
    Local Time
    12:25 PM
    I have a commercial Ross in .303 that shoots into two inches at 100 yards (open sights) with between 39gr and 40gr of H380, Woodleigh 215gr with an OAL of 3.15". This length is about as long as my magazine will comfortably handle and it seats the bullet at almost precisely case neck length. In the middle of this range of powder charges it chronographs at 2000fps give or take. Regards Tom.

  6. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Black Lab's Avatar
    Join Date
    Jan 2010
    Last On
    02-10-2014 @ 07:35 PM
    Location
    Fraser Valley BC.
    Posts
    37
    Local Date
    04-25-2025
    Local Time
    12:25 PM
    Thread Starter
    That's pretty darned good shooting. 39-40 gr. is close to max I'm thinking, yes/no ??? What would be your starting load ? Thanks, Jack
    Quote Originally Posted by oldpaul View Post
    I have a commercial Ross in .303 that shoots into two inches at 100 yards (open sights) with between 39gr and 40gr of H380, Woodleigh 215gr with an OAL of 3.15". This length is about as long as my magazine will comfortably handle and it seats the bullet at almost precisely case neck length. In the middle of this range of powder charges it chronographs at 2000fps give or take. Regards Tom.

  7. #6
    Legacy Member oldpaul's Avatar
    Join Date
    Mar 2009
    Last On
    02-02-2025 @ 01:17 AM
    Location
    Top left corner, between Vancouver and Vancouver
    Posts
    215
    Local Date
    04-25-2025
    Local Time
    12:25 PM
    My old Lyman 45th Edition lists a 215 gr jacketed bullet in this caliber with a starting load of 40.0 gr of H-380, 2028fps,with a maximum load of 43.0 gr, at 2150fps. My rifle is more accurate at between 39 and 40 grains. Hopefully the thumbnail I attached is clear enough as it shows other potential loads. I used H-380 early on because like you with 4350 I had it on hand. Regards TomAttachment 30731

  8. Thank You to oldpaul For This Useful Post:


  9. #7
    Legacy Member wjw's Avatar
    Join Date
    Nov 2011
    Last On
    Today @ 12:28 AM
    Location
    British Columbia
    Posts
    37
    Real Name
    Bill Warkentin
    Local Date
    04-25-2025
    Local Time
    02:25 PM
    Have used old Dominion 215 Gr. bullets with 45.0 gr. IMR 4350 in the past with good results. Waters in "Pet Loads" suggests 46.0 gr. IMR 4350 as a good heavy load as well as the same charge weight in H & IMR 4831 and RL-19 with Remington bullets as giving good accuracy and velocities between 2100 - 2220 FPS. "Handloading" by the NRA (American) suggest a load of 49.5 Gr. of IMR 4350- 2430 FPS and a pressure of 44630 using the Remingtonn bullet, Remington cases and Winchester primers. Always thought that was a bit hotter than I would like.

    Bill

  10. Thank You to wjw For This Useful Post:


  11. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    wayward wind's Avatar
    Join Date
    Mar 2012
    Last On
    03-18-2012 @ 11:38 AM
    Location
    carrot river sk.ca
    Posts
    5
    Local Date
    04-25-2025
    Local Time
    02:25 PM
    is any loads for 2oo gr cast listed

+ Reply to Thread

Similar Threads

  1. K31 Reloading help again! Bullets are too big?
    By onlycrimson in forum Swiss Rifles
    Replies: 39
    Last Post: 10-05-2012, 05:30 PM
  2. Reloading cast bullets for Luger and Walther P38
    By Greg H. in Virginia in forum Ammunition and Reloading for Old Milsurps
    Replies: 3
    Last Post: 08-17-2011, 01:22 PM
  3. more garand reloading questions.....bullets
    By mac1911 in forum Ammunition and Reloading for Old Milsurps
    Replies: 10
    Last Post: 11-30-2010, 09:19 PM
  4. Privi bullets for reloading,Any good?
    By big bear in forum Ammunition and Reloading for Old Milsurps
    Replies: 11
    Last Post: 02-27-2010, 01:16 AM
  5. reloading with SS109 bullets
    By kokomo in forum Ammunition and Reloading for Old Milsurps
    Replies: 2
    Last Post: 07-17-2009, 11:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts