+ Reply to Thread
Results 1 to 10 of 28

Thread: L42A1 with unusual fore end?

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Contributing Member RobD's Avatar
    Join Date
    Jan 2010
    Last On
    06-08-2025 @ 11:40 AM
    Location
    UK / South Africa
    Posts
    944
    Local Date
    06-19-2025
    Local Time
    10:20 AM
    Thread Starter

    Brain Dick has a spare L42A1 fore-end which he is sending me and EFD are sending me a beech cheekpiece.
    Three minor Q's:
    - Am I right in thinking that the correct screws for the cheekpiece are ordinary steel countersunk wood screws, 8-gauge, the front one inch-and-a-quarter, the rear one inch-and-a-half?
    - Would the cheekpiece have been stained or left in beech? The buttstock is walnut.
    - Where can I get hold of the dark green 1 inch webbing to replace the transit chest handles, which have worn away?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Legacy Member Simon P's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:51 AM
    Location
    Essex. UK.
    Posts
    645
    Real Name
    Simon Pemberton
    Local Date
    06-19-2025
    Local Time
    10:20 AM
    Why not cut up an old Enfield Rifleicon sling

  3. Thank You to Simon P For This Useful Post:


  4. #3
    Legacy Member Simon P's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:51 AM
    Location
    Essex. UK.
    Posts
    645
    Real Name
    Simon Pemberton
    Local Date
    06-19-2025
    Local Time
    10:20 AM
    Trigger Guard Screw / Swivel:

    Does it have the correct seating plate (16) to spread the load by the trigger guard screw or is it fitted with the collar (25)?

  5. #4
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    Yesterday @ 07:19 PM
    Location
    Sutton Coldfield, UK.
    Posts
    3,547
    Real Name
    Roger Payne
    Local Date
    06-19-2025
    Local Time
    10:20 AM
    Quote Originally Posted by RobD View Post
    Brain Dick has a spare L42A1 fore-end which he is sending me and EFD are sending me a beech cheekpiece.
    Three minor Q's:
    - Am I right in thinking that the correct screws for the cheekpiece are ordinary steel countersunk wood screws, 8-gauge, the front one inch-and-a-quarter, the rear one inch-and-a-half?
    - Would the cheekpiece have been stained or left in beech? The buttstock is walnut.
    - Where can I get hold of the dark green 1 inch webbing to replace the transit chest handles, which have worn away?
    Yes Rob. The screws are No8's in steel, countersunk; 1.25" in front & 1.5" at rear. Most beech cheekpieces have darkened over the years with linseed, dirt & age, but there's always a colour discrepancy to some degree as you'll never get beech to look like walnut.....but that's just the way they were.
    ATB.

  6. #5
    Legacy Member Simon P's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:51 AM
    Location
    Essex. UK.
    Posts
    645
    Real Name
    Simon Pemberton
    Local Date
    06-19-2025
    Local Time
    10:20 AM
    Rob

    If you want to compare your rifle with other L42s:

    You could come to the Field Firing Match on 19th February hosted by the Herts & Essex Shooting Association near Braintree in Essex.

    There will be two L42A1s in the exhibition on the No4 series of rifles. One will be in the transit case the other will be set up with the night sight.

    There will also be a number of rare trials rifles on display such as the pre-production No8, infantry & match rifles. Alongside this will be an exhibition of Section 7 pistols & revolvers.

+ Reply to Thread

Similar Threads

  1. No 4 MkII FORE-END
    By aussiedave in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-27-2010, 09:39 AM
  2. Fitting a new fore end?
    By RJW NZ in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 12-11-2010, 07:45 PM
  3. Fore-end tie plate
    By madcratebuilder in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 02-03-2010, 04:57 AM
  4. Fore-end for CNo4Mk1*
    By nimrod in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 06-27-2009, 07:28 PM
  5. #4 Mk 1 Fore sight
    By kilima312 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 03-16-2009, 07:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts