LEC restoration help plz

[tatou]

Getting slowly there there
Attachment 106895

Pulled an LEC Mk I out of the safe, and it looks like the barrel extends just over 1/4 of an inch past the nose cap. I also used a meter tape-measure, and I counted 7mm of barrel protrusion.

Good luck with the resto!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[husk]

Getting slowly there there
Attachment 106895

Well done!

[browningautorifle]

Getting slowly there

Looking very good, very nice.

[usabaker]

Getting slowly there there

Are you trying to motivate me to work on the two desecrated MK1's I have..... You are doing a fine job of it.

[tatou]

Are you trying to motivate me to work on the two desecrated MK1's I have..... You are doing a fine job of it.

Well that wasn't my intention but if you really want motivation about Mk I's here's 2 i did last year. Both were sporters when i got hem.
LSA 1904 Mk I
BSA-Sparkbrook 1907 MK I*