-
FREE MEMBER
NO Posting or PM's Allowed
how high the block?
When I close my martini action, the breech block barely covers the rim of the top of the cartridge, it doesn't rise up to the top of the barrel rim. Is that normal? or is the camming action not pushing the block all the way up?
Phil
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
02-18-2010 04:36 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Sounds about normal to me. The issue on block height is where the firing pin strikes the primer. If it goes bang, then you're fine. If it doesn't, then we can talk adjustment.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks Rich, I'll check the pin strike on my next round
Phil
-
FREE MEMBER
NO Posting or PM's Allowed
If I might, I have a question here. The pin on my martini-enfield seems to be punching the primer dangerously deep. On the left one in my Lee-Enfield and the one on the right, my Martini. Reasons why?
-
FREE MEMBER
NO Posting or PM's Allowed